[giaban]Contact[/giaban] [mota]P400 Series Mainline Tractors are powered forward and reverse and provide significant performance advantages over track crawler systems in harsh environments...  [/mota] [masp] [/masp] [chitiet] 

• Downhole equipment approved, labelled and listed by a nationally recognized testing laboratory (NRTL) for use in Class I, Div 1, Gas Groups C & D,
• T3 environments.
• Inspection capabilities in lines 6" (150mm) and larger in diameter.
• Powered forward and reverse.
• No external wiring to lightheads.
• Wide variety of lightheads and wheels available for inspection versatility in various pipe materials such as PVC, concrete, VCP and corrugated.

• 
  P420
  6-Wheel drive small tractor for pipes 6" to 30" (150mm-750mm) in diameter; up to 110W of lighting.
  
  P400
  4-Wheel drive large tractor with remote controlled elevator for pipes 12" (300mm) and larger; up to 200W of lighting.
  
  P448
  4-Wheel drive large steerable tractor with remote controlled elevator for pipes 20" (500mm) and larger; up to 200W of lighting; negotiates bends and turns on its own axis.

 [/chitiet] 

[giaban]Contact[/giaban] [mota] The RD546 is a mechanical listening stick made from high-quality materials for water leak detection at meters, pipes and other fittings.[/mota] [masp] [/masp] [chitiet] 

• Even with today’s sophisticated technology, mechanical measurement instruments offer unique and cost-effective advantages. Many situations do not require any sensitive electronics and it is often more practical to use the RD546, which does not require a power supply and does not have the inherent noise associated with electrical products.
• The RD546 is made of high-quality materials. The vibration element inside consists of a bronze spring that is designed to transfer vibration via a resonator to the operator’s ear. Stainless steel extensions, from 5 to 78 inches (13 to 200cm), make the RD546 adaptable to any task. The RD546 is the ideal, low tech and, cost-effective solution for detecting leaks in meters, pipes and other fittings.

 [/chitiet]

[giaban]Contact[/giaban] [mota]The RD545 is an advanced electronic ground microphone designed to amplify the noise generated by water escaping from underground supply pipes under pressure....  [/mota] [masp] [/masp] [chitiet] 

• The RD545 is an advanced electronic ground microphone designed to amplify the noise generated by water escaping from underground supply pipes under pressure. Identifying the position of the loudest leak noise indicates the likely position of a leak. The system features a highly sensitive ground microphone that can detect even the smallest leaks. Measurements are saved to the central unit, allowing the operator to compare readings over time. The integrated Digital Signal processing provides 6 different analog signal filters that help to suppress unwanted noises. The LCD shows the last 6 measurements graphically and numerically. The unique adjust function automatically optimizes the indication sensitivity of the test rod. With simple one-button operation and a large display that automatically adjusts brightness, the RD545 is the ideal leak locator for a wide variety of domestic and industrial applications.

 [/chitiet] 

[giaban]Contact[/giaban] [mota]The RD542 is a small handheld electronic water leak detection tool especially suited to detecting leaks at water meters.  [/mota] [masp] [/masp] [chitiet] 

• The RD542 is a small handheld highly sensitive leak detector that can detect minute leaks in customer and supply side water networks. Its small size, light weight and optional backlit LED makes it ideal for taking quick measurements to localize leak locations.  The kit includes test rods which can extend the RD542’s range into hard-to-reach or congested access points. A single button operates the unit and an intuitive LED meter provides immediate results. When the unit detects an anomaly, the operator can attach the included headphones to verify if the sound is the result of a leak.

 [/chitiet] 

[giaban]Contact[/giaban] [mota] The RD533 correlator locates and pinpoints water leaks on underground water pipes using sensors attached to infrastructure fittings.[/mota] [masp] [/masp] [chitiet]  

• The RD533 correlator is a multi-function system that is designed to detect leaks and trace the topography of water supply networks. When used with a transmitter, the RD533 can trace a pipe’s route underground. The system features a highly sensitive ground microphone that can detect even minute leaks. The automatic frequency search function coupled with automatic and manual digital filtering allows the operator to locate leaks rapidly with minimal error.
• Measurements are saved to the central unit, allowing the operator to compare readings over time to establish the network's ongoing condition. With simple one-button operation and a display that automatically adjusts brightness, the RD533 leak noise correlator is the ideal leak detection device for a wide variety of industry applications.

[/chitiet]

[giaban]Contact[/giaban] [mota] The RD1000+ GPR detects non-conductive underground utilities using advanced image-processing filters and wide-band radar technology.[/mota] [masp] [/masp] [chitiet]

• Radiodetection’s RD1000+ provides high-performance subsurface imaging for buried utilities in a rugged and competitively priced Ground Penetrating Radar system.
• Designed for the utility industry, the RD1000+ features a wide-band sensor capable of detecting plastic and ceramic utilities at depths of up to 8m / 27’ deep. Once a utility is detected, the operator can simply reverse the cart to switch the RD1000+ into Locate Mode and determine the utility’s depth and position, simplifying utility identification.
• Advanced DynaQ signal processing optimises signal quality, providing real-time image updates and high levels of detail. Integrated digital filters and color palettes allow operators to pick out even small utilities located in differing subsurface materials and soil types.
• Operators can capture what’s on the display with a single touch. Locate images can be transferred to a PC from the Compact Flash card using the dedicated RD1000+ ImageView software to assist in documenting and analysing surveys.
• Built from durable, weatherproof (IP66 rated) materials, and supported by a range of wheel types and accessories, the RD1000+ can operate across rough or smooth terrain. The modular design also makes the system quick to service and repair.
• Weighing only 48lbs (22kg), the system is designed to be transported and assembled without requiring specialist equipment in less than two minutes. Key components can be packed in hard or soft travel cases, and a flight case is also available to protect an entire system during transportation.

  [/chitiet] 

[giaban]Contact[/giaban] [mota] 

The cutting-edge RD8000 Cable Locator range offers locate professionals advanced connectivity options and multiple locate functions. [/mota] [masp] [/masp] [chitiet] 

• Centros™: RD8000 locators are Centros™ enabled. Centros™ is a measurement engine based on more than 30 years of continuous development, combining new and innovative algorithms with tried and tested software in a high performance microprocessor. Centros™ improves locator accuracy and repeatability, delivering timely responsiveness.
• ILOC™: ILOC is an advanced long range Bluetooth link between the RD8000 locator and transmitter (Tx-5B or Tx-10B) that helps save the operator time and effort. iLOC allows control of the transmitter remotely up to 300 meters (line of sight providing), enabling the operator to spend less time walking and more time locating. 
• Trudepth™: Indicates depth when the locator is oriented correctly above the target pipe, cable or marker for the most accurate reading. 
• GPS: All RD8000 models can connect to external GPS receivers, allowing positional data to be associated with locate histories. Optional internal GPS on the RD8000 marker locators provides ‘street level’ accuracy positional data for associating with usage history of points of interest without the need for an external device.
• SurveyCert™: RD8000 locators can store up to 1000 locate records on demand, allowing operators to easily document and report surveys or points of interest. GPS data, from external or internal* GPS can also be stored to enable easy integration with GIS/Mapping systems. Measurements can be transferred to a PDA or PC using Bluetooth or USB* connections
• Peak/Null Mode: Helps to identify the effects of distortion due to ground effects or nearby utilities. Simultaneous display of peak bar graph response and proportional null arrows allow a quick assessment of locate conditions.
• Remote Calibration: Using the Windows software, locators can be checked for correct calibration and operation over the Internet without the need to return the RD7000+ for service. A calibration certificate can be saved, emailed or printed or a service can be booked should any issue be detected.
• Extended Warranty: Radiodetection offers a free upgrade to a 3 year extended warranty on RD7000+ locators and transmitters (product must be registered within 3 months of service). Registration also offers free product software and feature upgrades.
• Bluetooth Connectivity: The RD7000+ marker locator models detect all commonly used RF utilities markers. TruDepth™ automatic depth estimation without the need for two step measurements allows for faster & more accurate surveys. Combined mode allows scanning for cables, pipes and markers simultaneously.
• Data Logging: On board memory* can store over a year’s worth of locate history at one second intervals. Data can be backed up to a PC at any time giving virtually unlimited record keeping for the life of the product. Retrieved data can be analysed for compliance or training requirements.

 [/chitiet]

[giaban]Contact[/giaban] [mota] The cutting-edge RD8000 Cable Locator range offers locate professionals advanced connectivity options and multiple locate functions.[/mota] [masp] [/masp] [chitiet] 

• Centros™: RD8000 locators are Centros™ enabled. Centros™ is a measurement engine based on more than 30 years of continuous development, combining new and innovative algorithms with tried and tested software in a high performance microprocessor. Centros™ improves locator accuracy and repeatability, delivering timely responsiveness.
• ILOC™: ILOC is an advanced long range Bluetooth link between the RD8000 locator and transmitter (Tx-5B or Tx-10B) that helps save the operator time and effort. iLOC allows control of the transmitter remotely up to 300 meters (line of sight providing), enabling the operator to spend less time walking and more time locating. 
• Trudepth™: Indicates depth when the locator is oriented correctly above the target pipe, cable or marker for the most accurate reading. 
• GPS: All RD8000 models can connect to external GPS receivers, allowing positional data to be associated with locate histories. Optional internal GPS on the RD8000 marker locators provides ‘street level’ accuracy positional data for associating with usage history of points of interest without the need for an external device.
• SurveyCert™: RD8000 locators can store up to 1000 locate records on demand, allowing operators to easily document and report surveys or points of interest. GPS data, from external or internal* GPS can also be stored to enable easy integration with GIS/Mapping systems. Measurements can be transferred to a PDA or PC using Bluetooth or USB* connections
• Peak/Null Mode: Helps to identify the effects of distortion due to ground effects or nearby utilities. Simultaneous display of peak bar graph response and proportional null arrows allow a quick assessment of locate conditions.
• Remote Calibration: Using the Windows software, locators can be checked for correct calibration and operation over the Internet without the need to return the RD7000+ for service. A calibration certificate can be saved, emailed or printed or a service can be booked should any issue be detected.
• Extended Warranty: Radiodetection offers a free upgrade to a 3 year extended warranty on RD7000+ locators and transmitters (product must be registered within 3 months of service). Registration also offers free product software and feature upgrades.
• Bluetooth Connectivity: The RD7000+ marker locator models detect all commonly used RF utilities markers. TruDepth™ automatic depth estimation without the need for two step measurements allows for faster & more accurate surveys. Combined mode allows scanning for cables, pipes and markers simultaneously.
• Data Logging: On board memory* can store over a year’s worth of locate history at one second intervals. Data can be backed up to a PC at any time giving virtually unlimited record keeping for the life of the product. Retrieved data can be analysed for compliance or training requirements.

 [/chitiet]